Panasonic SMT Pick Place Machine NPM-TT2 SMT Placement
- Handles boards up to 510 mm by 510 mm.
- Places parts at 18,000 per hour max.
- Accuracy within 40 microns for chips.
- Supports tape feeders from 4 to 104 mm.
- Works with tray and stick feeders too.
- Dual-lane mode for non-stop work.
- I.C.T provides on-site training and fixes.
- Connects to other line machines easily.
Description
Panasonic SMT Pick Place Machine Overview
The Panasonic SMT Pick Place Machine helps in putting small parts on circuit boards for electronics making. It works well for factories that need to place components fast and right. This machine can handle different sizes of boards and parts, from tiny chips to bigger ones. It has options for feeding parts from tapes, trays, or sticks, making it easy to set up for various jobs.
With dual lanes, the Panasonic SMT Pick Place Machine lets you work on two boards at once or switch between them without stopping. It connects to other machines like printers for a full line. The placement heads can be changed to fit odd-shaped parts, and it checks parts before picking them to avoid mistakes. Speeds go up to 18,000 parts per hour for small chips, helping lines run smooth.
I.C.T offers this Panasonic SMT Pick Place Machine with full support, from setup to training. It’s built to last, with strong power and air systems. Dimensions fit most factory spaces, and it’s light enough to move if needed. Overall, the Panasonic SMT Pick Place Machine is a solid choice for improving board assembly without complex setups.
Key Features of High Speed Panasonic SMD Placement
Advanced Recognition System
The multi recognition camera in the Panasonic SMT Pick Place Machine looks at parts from different angles, including height. This helps place odd-shaped items without issues. It combines data from line cameras and 3D sensors for full checks. Speed goes up because it spots problems fast, like wrong direction or size. Factories get stable runs, even with mixed parts. The system works with other machines in the line for shared info, cutting setup time. Overall, it makes mounting reliable for high-volume jobs, reducing waste and rework. Users can add vertical inspection for extra safety on complex boards.
Independent Placement Efficiency
High productivity comes from fully independent placement in the Panasonic SMT Pick Place Machine. Each head works on its own, so tray parts mount without waiting. This boosts line output, especially for mid to large components. The 3-nozzle head handles up to 100 N load, fitting heavy items. It cuts cycle time by placing items alternately or at once. Connecting to other units like NPM-D3 enhances the whole setup. Factories see better flow, with no bottlenecks. Options let you pick methods based on board type, making it flexible for various products.
Automatic Pin Support Change
Support pins change position automatically as an option in the Panasonic SMT Pick Place Machine. This helps during changeovers by placing pins where needed without hands-on work. It saves time and cuts errors from manual setup. The system allocates pins based on board data, keeping things stable. Non-stop changes mean one lane runs while the other sets up. This feature aids manpower savings in busy factories. It works with software for easy programming, fitting different board sizes. Overall, it streamlines operations for faster shifts between jobs.
Feeder Cart Swap Option
The feeder cart changeover spec is an option for the Panasonic SMT Pick Place Machine. It lets you swap tray feeders or carts at the front or rear. This matches parts supply to your needs, like tapes or trays. Exchange is simple, done on-site without tools. It supports up to 120 feeders in some setups, handling many part types. Versatility comes from rearranging units for PoP components too. The transfer unit adds handling for tape or tray installs. This keeps lines adaptable, reducing downtime for supply changes.
Pre-Pick Inspection Feature
Inspection before pick-up is an option in the Panasonic SMT Pick Place Machine. It checks tray or reel parts for issues like wrong orientation or numbers. Using chamfering, pattern matching, and text recognition, it spots errors early. This prevents bad placements and traces components. Average luminance and 2D codes help detect foreign material or stains. It works on components before they move, saving time on fixes later. Factories get fewer defects, with NG tracking for logs. Adding this boosts quality control without slowing the pace.
Specifications of Panasonic NPM-TT2 SMT Placement
- Placement Head: Lightweight 8-nozzle head or 3-nozzle head V2 (per head).
- Placement Accuracy (Cpk≥1): ±40 μm/chip, ±30 μm/QFP (12-32 mm), ±50 μm/QFP (under 12 mm).
- Placement Speed: 18,000 cph (0.20 s/chip) for lightweight 8-nozzle, 7,200 cph (0.50 s/chip) for QFP.
- Component Dimensions: 0402 chip to L 150 × W 25 × T 30 mm.
- Component Supply Taping: Tape 4 to 56/72/88/104 mm.
Tray: Specifications for front/rear tray feeders: Max. 52.
Stick: Specifications for front/rear feeder carts: Max. 120 (single stick feeder). - PCB Dimensions: Single-lane mode: L 50 × W 50 ~ L 510 × W 510 mm (M size).
- Dual-lane mode: L 50 × W 50 ~ L 510 × W 260 mm (M size).
- Electric Source: 3-phase AC 200/220/380/400/420/480 V, 2.5 kVA.
- Pneumatic Source: Min. 0.5 MPa, 200 L/min (A.N.R.).
- Dimensions: W 1,300 × D 2,798 × H 1,444 mm.
- Mass: 2,690 kg.
More SMT Line Machines
| Equipment | Description |
|---|---|
| Loader | Loads PCB into the production line automatically. |
| Auto Printer | Applies solder paste with high precision. |
| Conveyor | Moves PCB smoothly between machines. |
| Pick and Place Machine | Places components accurately on PCB. |
| Reflow Oven | Melts solder to bond components securely. |
| AOI Machine | Inspects PCB for defects automatically. |
| Unloader | Removes finished PCB from the line. |
I.C.T Installation and Training Success
Our team at I.C.T handles assembly and debugging in customer factories. Engineers then train staff on the Panasonic SMT Pick Place Machine. Group photos after sessions show happy clients. These images highlight smooth installs and user confidence. Satisfaction comes from clear guidance and quick issue fixes during visits.
PCB Pick Place Machine: Customer Feedback
Clients often praise our engineers for fast answers before sales and quick fixes after. They like the quality of SMT equipment like the Panasonic SMT Pick Place Machine. Reviews mention reliable builds and helpful support that keeps lines running without long stops.
Certified Quality Standards
I.C.T holds CE certificates for each machine, including the Panasonic SMT Pick Place Machine. We also have ISO9001 for quality management and patents on key tech. These ensure safe, standard-compliant products.
About I.C.T Company
I.C.T is a company focused on SMT solutions, based in China with global reach. We supply machines like the Panasonic SMT Pick Place Machine to electronics makers. Our team offers full services, from sales to aftercare. We aim for reliable tools that fit factory needs. With years in the field, we partner with brands like Panasonic for quality gear. Factories trust us for timely deliveries and tech support.
Frequently Asked Questions
A Panasonic SMT Pick Place Machine can handle components ranging from tiny 0402 chips to larger parts measuring up to 150 mm × 25 mm, with component heights up to 30 mm. This wide placement range allows the machine to process resistors, capacitors, ICs, connectors, LEDs, odd-shaped components, and industrial modules on a single SMT production line. Such flexibility makes it suitable for consumer electronics, automotive electronics, communication equipment, and industrial control products. To achieve optimal placement performance, manufacturers should select the appropriate nozzle type and feeder configuration for each component category.
Additional information
| Model | Panasonic NPM-TT2 |
|---|---|
| Applicable PCB | Single-lane mode: L 50 × W 50 ~ L 510 × W 510 mm (M size). |
| Applicable components | 0402 chip to L 150 × W 25 × T 30 mm. |
| Mounting accuracy (high-accuracy mode) | ±40 μm/chip, ±30 μm/QFP (12-32 mm), ±50 μm/QFP (under 12 mm). |
| Mounting capability | 18,000 cph (0.20 s/chip) for lightweight 8-nozzle, 7,200 cph (0.50 s/chip) for QFP. |
| External dimension (excluding projections) | W 1,300 × D 2,798 × H 1,444 mm. |
| Weight Approx. | 26900 kg |
