I.C.T-5200 | SMT PCB Electric Fixture Cleaning Machine
I.C.T-5200 Fixture Cleaning Machine is used to clean grease, flux, dusts on the surface of all kinds of SMT fixtures,tray, reflow
oven cooler and filter, wave-soldering oven claw, chains, and nets…etc.
Electric Fixture Cleaning Machine
- Total SUS 304 structure, resist Acid and Alkali corrosion, firm and attractive.
- 1 meter diameter big cleaning round basket, can clean 20~40 pcs fixtures at one time.
- Clean liquid spray from 3 spray rods on upper/lower and front side, cleaning basket rotates during cleaning.
- Clean liquid pressure up to 6kg/cm2, make it throughly clean of whole fixture.
- PLC program control, Touch-panel operation，cleaning parameters can be set and change conveniently.
- Easy One-button operation, high pressure clean+ rinse+ hot air dry, all process complete in a cycle automatically.
- Clean liquid and water heat and temperature keeping function.
- Closed-loop clean and rinse, clean detergent and rinse water are cycling filtered and reused in the machine.
- Standard equipped solution and water auto fill in and discharge function.
- The fixtures are clean and dry after cleaning, standby and ready for use at any time.
|Cleaning basket size||
Φ1000mm x H 200mm. Special size option
Upper/lower/front side,720°all-around spray
|3-level filter system||
1mm /50um/20um filters
|Compressed air pressure||
|Clean tank capacity||
|Rinse water heat temp||
|Hot air heat temp||
|Clean pump power||
|Clean detergent power||
|Air blower power||
3 P,AC 380V,50/60HZ,33KW
L1380 x W2100 x H 1400 (mm)