I.C.T-L4020 | Axial Insertion Machine

Description

I.C.T – L4020

Automatic Axial Insertion Machine

Introduce：

• Expandable from 20 stations
• Speeds up to 20,000/hour
• Low maintenance feeder technology
• Dual part detection – two parts in same chain slot.
• Insertion Directions: 0°,90°,180°,270°
• Jumper Wire Feeder Support
• Neighbor components parallel distance E(pitch)=5.0mm
• Tape width: 52mm
• Max Component Body Length：C=16mm , Resistor:1/8W-2W
• Axial Lead Component Kind：Diode、Resistor、Capacitor and so
• Max body diameter D=5.0mm

Tips: What are the components of PCB thru-hole?

The components of a printed circuit board (PCB) that use through-hole technology typically consist of the following:

Resistors: These components are used to resist the flow of electrical current in a circuit. Through-hole resistors are typically cylindrical in shape and have two leads that are inserted into holes on the PCB.

Capacitors: Capacitors are used to store and discharge electrical energy in a circuit. Through-hole capacitors are typically cylindrical or rectangular in shape and have two leads that are inserted into holes on the PCB.

Diodes: Diodes are used to control the flow of electrical current in a circuit. Through-hole diodes are typically cylindrical in shape and have two leads that are inserted into holes on the PCB.

Transistors: Transistors are used to amplify and switch electrical signals in a circuit. Through-hole transistors are typically three-pronged devices with a base, emitter, and collector lead that are inserted into holes on the PCB.

Integrated circuits (ICs): ICs are complex electronic devices that contain multiple components and perform specific functions in a circuit. Through-hole ICs are typically rectangular in shape and have multiple leads that are inserted into holes on the PCB.

Connectors: Connectors are used to connect different parts of a circuit or to interface the circuit with external devices. Through-hole connectors are typically rectangular or cylindrical in shape and have multiple leads that are inserted into holes on the PCB.

These are some of the most common through-hole components used in PCB manufacturing, but there are many other types of components that may also be used depending on the specific needs of the circuit.

Name *

Email *

Tel. *

Your Inquiry:

Please tell me your inquiry and your company information. If you are interested in a certain machine, please kindly copy the title and model to us. We will contact you soon.

Submit